Skip to content

Victorian Nickel Claverley Bell Pull


We currently have 2 in stock.

A fantastic quality reproduction Victorian nickel Claverley bell pull mounted in a solid oak plate, for operating mechanical antique front door bell systems. A heavy duty return spring and action so can operate both original and reproduction bells. The nickel solid brass outer and inner pull and made using the lost wax method so each one is slightly different. The imposing 'PULL' centre knob is solid porcelain and has a crackle aged finish, again each one is slightly different. The pull has an antique nickel finish to start off the tarnishing process but it can be polished back to shiny with a nickel polish.

The return spring is of a heavy construction the same as an original Victorian on so can be used to operate original or reproduction bells. Also supplied with the blanking pulley for taking the cord out of the inside of the wall. We normally have a few original bells over in the antique shop as well as our stock of reproduction bells and pulleys. Check out the 'fitting' tab over on the right for a guide to how they are connected to the bells.  

Finish: Antique nickel
Height: 155mm
Width: 160mm
Supplied with: Nickel slotted screws, wire protector, nickel blanking pulley, wall plugs & Instructions.

Incl VAT

Stock Updates

Subscribe for our occasional antique stock updates, news & new products.