Antique & Period Hardware

A solid brass pair of antique counter top hinges, flush fitted to create a pass for pub counters, shops, worktops etc. They've had all the paint st...

Matching pairs of 1950s new old stock 3'' steel door hinges with their original screws, stamped TC on the reverse. Sold in pairs.  Condition: Never...

A small bronze padlock by Yale with its cylinder key, probably mid 1900s, stamped Made in England on the shackle. They still make a similar padlock...

A  large mid to late 1900s brass padlock by Union, stamped Made in England with it's original key, cleaned & lightly polished, in a mid tone of...

An antique late 1800s/early 1900s solid brass padlock, stamped 'Eagle Lock & Co, Terryville, USA' with its original key. Quite an unusual shape...

An ETA 5 lever steel closed shackle padlock, probably mid 1900s, with its original key. We've removed all the loose material and given it a wax. Co...

An antique 1920s closed shackle steel 4 lever padlock with its original key and brass key cover.  Condition: Good working condition  Sizes & in...

A large cast alloy mid century factory sign, some kind of Water Services sign, quite heavy at 3kg. Recently reclaimed from a late 1800s commercial ...

Reproduction brass 'Gents' brass sign, these are actually new old stock, unlacquered and each one has had a quick buff. Condition: Good condition. ...

An original articulated machinist or desk lamp from the 1950s or 60s by Memlite. We've left it as original as possible, it's all be stripped down, ...

A mid century steel wall lamp with a glass shade & porcelain fittings. It's had a good clean, the cable is fairly new. Just needs a plug & ...

A large early to mid 1900s light switch by Lectrik, ceramic bases and brass cover. The switch have been tested on a 12v circuit, not sure they meet...

Matching early to mid 1900s light switches with ceramic bases and decorative brass covers. They have been tested on a 12v circuit, not sure they me...

A mid 1900s Grey enamel angled industrial light shade by Crysteel. It's just had a good clean.  Condition: Original condition. dings, dents, marks ...

An antique late 1800s cast iron double pulley wheel, originally used for clothes airers and the like. Screw threaded on one end for screwing into w...

A nice quality antique late 1800s cast iron double pulley wheel, originally used for clothes airers and the like. Screw threaded on one end for scr...

Reclaimed hand cranked fire bells, not overly old you can still buy very similar ones. They've had a bit of use though, came from a strip out we di...

An usual set of 4 matching small finials, some kind of claw & glass ball. No idea what they were used for, they look like they were once plated...

Nice quality reproduction cast iron air brick with an antiqued finish, this style of vent was seen in period properties from the 1800s right into t...

A lovely and very useful pair of late 1800s antique Victorian cast iron wall brackets. There is a reproduction of this design but these are the ori...

A good pair of antique iron wall brackets, not sure how old they are, could be 1800s or early 1900s, they've certainly see some use. Sold as a pair...

A wrought iron pair of original wall brackets, probably from a cistern as they have a 20mm stop on the end . Both are stamped with the RD Number, d...

4 unusual columns, in what I think is mahogany. They have a screw thread at the base and another at the top that doesn't screw all the way into the...

A reclaimed pair of pine finials, possibly from a newel post. Unsure of age, but they've seem some use. They'll need refinishing. Condition: Marks ...